Publications - In Journals
1. Some investigations on a hydraulic copying device, "TECHNOLOGY", Journal of PSG College of Technology, 1971.
2. Studies of cavitation and pressure surges in linear hydraulic devices, "TECHNOLOGY", Journal of PSG College of Technology, Vol. 20, 1972.
3. An investigation on the Machining of Hardened C45 at Elevated Temperatures, machine Building Industry, May 1973.
4. Optimum Design of Machine Tool Spindles, Machine Building Industry, 1974.
5. Machine capability as criterion for the dynamic evaluation of machine tools, Machine Building Industry, December 1974.
6. Reliability in Response Surface Technique applied to the Performance Testing of a Centre Lathe, Interlink, 1979.
7. Analysis of Performance of lathes using Response Surface Technique. Machine Building, Industry, 1980.
8. An investigation on the Effect of Entrained Air on Peak Pressures and Cavitation in a Hydraulic System, Institution of Engineers, July 1982.
9. Theoretical investigation on Pressure peaks and cavitaion in a linear hydraulic drive, Institution of Engineers, 1983.
10. Normal Response Characteristics of Plastic Slideway Materials used in CNC Machines. Annual Paper meeting, The Institution of Engineers (India), Chandigarh, 1985. Published in the Journal part ME, 6, May 1987.
11. CORES - A Knowledge Based Expert System, Society of Mechanical Engineers Technical papers, April 1990.
12. Automated Visual Inspection of Geometric Tolerance in Circular Components, The International Journal of Advanced Manufacturing Technology, UK., 1993.
13. Visual Identification of Industrial Components using Part Family Classification Coding Systems Computers in Industries, Netherlands., 1993.
14. Development of FMC control programme and Implementation in MESSUNG PLC TEHCNOLOGY Journal, PSG College of Technology, March, 1995.
15. Studies on the Influence of Fabrication Orientation on the Productivity of fusion Deposition Modelling, TECHNOLOGY, Journal of PSG college of Technology, 1998.
16. Interfacing Geometric Model Data with Rapid Prototyping Systems, Journal of Intelligent manufacturing, Kluwer Academic Publishers, (1999) 10, 323-329.
17. Rapid tooling for casting - A study on the application of rapid prototyping process, Indian Foundry Journal, Nov, 1999.
18. Thermal analysis of spindle units under high speed machining Journal of Institution of Engineers (India) - Vol. 81, Jan 2001.
19. Critical parameters influencing the quality of prototypes in fused deposition modelling. Journal of Material Processing Technology, Elsevier Science B.V. 118 (2001) pp 385-388, 2001.
20. Scheduling rules for dynamic shops that manufacture multi-level jobs. Journal of Computer & Industrial Engineering 44 (2002) pp 119 - 131.

Top

 
Publications - In International Conferences
1. Effect of Entrained Air on the Pressure Peaks in a Linear Hydraulic drive, 5th Canadian Conference on Applied Mechanics Federation, Canada 1975.
2. An investigation of the effect of Tool Geometry and cutting conditions on the limit width of cut in turning, Proceedings of ICPE, Delhi 1977.
3. Real time spectrum analysis of chatter in turning, 5th Canadian Congress of Applied Mechanics, Canada, June 1981.
4. A Knowledge Based Process Planning Strategy directly from geometric Model - Some Manufacturing aspects of Modelling of doubly curved surfaces, DACIM 1991.
5. AI Based Manufacturing check and Process Planning - 2nd International Conference in Die & Mould Design, September, 1992 Singapore.
6. Methodology to detect the position of an image segment within specified interval in a Vision Envelope, Proc. 4th International Computing Congress, Hyderabad, 15-18, December 1993.
7. Some applications of Machine Vision Inspection Systems, in Industries Proc. Of INCARF 93, New Delhi, India, Dec, 1993.
8. A Simulation Model for Production Planning and Capacity Analysis of a Cable Industry, ICSOC, 1994, December 15-17, 1994.
9. Precision Analysis of Computer Vision Systems in soft gauging applications, ROVPIA, 1994, Malaysia, May 1994.
10. Two Dimensional Image Reconstruction from the perspective view of a polyhedron, ROVPIA, 1994, Malaysia, May 1994.
11. Assembly Shop Scheduling through priority dispatching rules, International Conference on CAD, Automation, Robotics and Factories of Future, New Delhi, 1996.
12. Investigation on the effect of shop load and job configuration on assembly shop scheduling, International Conference on Advances in Mechanical and Industries Engineering, Roorkee, 1997.
13. A Features based approach to process planning and Quality Control, International Conference on Quality Engineering and Management, August 1997.
14. Studies on the influence of Fabrication Orientation on the Productivity of Fusion Deposition Modelling, 13th International Conference on CAD/CAM Robotics & Factories of the Future, December 1997.
15. Generative Process Planning based on Feature Extraction - A case study, 13th CARS & FOF International Conference at Columbia, 1998.
16. State of the Art CAD/CAM technologies in Tool and die making, International seminar on World Class Tooling, March 1998, Bombay.
17. Design and development of tool Database Management System for value production unit BHEL, India - A Case study EUFIT’98, Aachen, Germany.
18. Taguchi’s approach to improve surface topography of low carbon steel components finished by surface grinding, EUFIT ’98 Aachen, Germany.
19. The formulation of geometric model data for Rapid Prototyping, 15th Irish Manufacturing Conference, 2-4th September, 1998, Ireland.
20. Influence of process parameters on the quality of prototypes in fused deposition modelling, 14th International Conference on CAD/CAM, Robotics & Factories of the Future, December 1998, PSG College of Technology, Coimbatore.
21. Process Plan Generation System for Feature Based Computer Aided Process Planning, Proceedings of the 14th CARS & FOF, PSG College of Technology, December 1998.
22. Integration Education and Practical Training in Undergraduate programme - the PSG Models, The International Conference on Modern Industrial Training, China.
23. An Educational System to promote dynamic Industrial Climate, International Conference on Education, The Next Millennium, New Delhi, 1998.
24. Direct Rapid Tooling for Complex Geometrical Components using Direct Metal Laser Sintering Process, The 34th International Seminar on Manufacturing Systems, 16-18, May 2001, Athens, Greece.
25. Direct Rapid Tooling for complex Geometrical components using Direct Metal Laser Sintering Process - Proceedings of 34th CIRP International Seminar on Manufacturing Systems, May 2001, Athens, Greece.
26. Studies on strength of prototype components made by fused deposition modelling, 7th International Pacific Conference on Manufacturing & Management [PCMM 2002], 27 - 29, November 2002.
27. Determination of Optimum orientation using genetic algorithm approach in layered manufacturing. 19th International Conference on CAD/CAM, Robotics and Factories of the Future, [CARS & FOF 2003], 22 - 24, July 2003, Kuala Lumpur, Malaysia. Proceedings Vol. 2, pp 661 - 670.

Top

 
Publications - In National Conferences
1. A critical review of research on cavitation in electrohydraulic valves and actuators - Third Conference on Fluid Mechanics and Fluid Power, IIT, Kharagpur, 1972.
2. Effect of Air content on the transient pressures in an oil hydraulic system, Fourth National Conference on Fluid Mechanics and Fluid Power, held at IIT Madras, December 21st & 22nd 1973.
3. On the Geometry of Gear Hobbing, Paper presented at Sixth AIMTED Conference, Bangalore, December 1973.
4. Effect of Entrained Air on the pressure peaks and cavitation in a Linear Hydraulic Drive, 6th National Conference on Fluid Mechanics and Fluid Power, IIT Kanpur, 1975.
5. Effect of compressibility due to entrained air on the performance of hydraulic system, AIMTDR, 1976.
6. Comparative acceptance testing of lathes on the basis of the accuracy of work places, AIMTDR, 1976.
7. An investigation of the effect of tool geometry and cutting conditions on the limit width of cut in turning, Proceedings of International Conference on Production Engineering, august 1977, Vol.1, V.29-37.
8. Response surface approach to chatter in Turning, 8th AIMTDR Conference, Bombay, 1978.
9. Optimization of slideway grinding, 8th AIMTDR Conference, Bombay, 1978.
10. Real Time Analysis of Chatter in Turning, Proc. III ISME Conference on Mechanical Engineering, 1980.
11. Some observations on the real time spectrum of chatter vibrations. Paper presented in the 9th AIMTDR Conference, IIT Kanpur, 1981.
12. A contribution to the experimental determination of Frequency of Chatter Vibrations in Turning, Vth ISME Conference, December 1982.
13. Design of a Microprocessor Controlled Special Purpose Lathe, Proceedings of X AIMTDR Conference, CMERI, Durgapur, 1982.
14. Sequencing of Multi-Cylinder Pneumatic Systems using a microprocessor, Fourth All India Fluid Power Exhibition and Conference, November 1983.
15. Design of a Programmable Sequence Control System of a Slotting Machine, Proc. of Conference on Machine Tool Design, Banaras Hindu University, Feb. 1984.
16. CAD Technique applied to the Evaluation f the performance of Machine Tool Spindles with preload, Proc. XI AIMTDR, IIT Madras, December 1984.
17. Kinematic Analysis and Simulation of a Robot by Computer Graphics, Proc. Conference of Mechanisms, Bangalore 1985.
18. A PC based static deflection compensation procedure for 2R Roots, CSI Convention at Madras, 1987.
19. Development of Software for CNC part programme preparation using Computer Graphics, in 12th AIMTDR Conference, IIT, Delhi, 1987.
20. Testing of Retrofit CNC Lathe, in 12th AIMTDR Conference, IIT Delhi, 1987.
21. Performance of Evaluation and design recommendation for use of epoxy resins in the design of machine tool structures, 13th AIMTDR Conferences, November 1988.
22. Value Engineering through design optimization using CAD, 13th AIMTDR Conference, November 1988.
23. Computer recognition of 2D views of objects for use in Robotics, 13th AIMTDR Conference, November 1988.
24. Computational and Experimental Study of Large Composite Structures for High Stiffness Applications, Proceedings of the 34th Congress of Indian Society of Theoretical and Applied Mechanics, December 1989.
25. CORES - An Expert System Approach for coding and Retrieval of Components, Proceedings of national Conference on CAD/CAM, Coimbatore, 1989.
26. Design optimization of Articulated Robots for Improved Dynamic Performance, Proceedings of ROSYMP-90, Symposium at BARC, Bombay.
27. Analysis and Optimization of Pneumatically actuated linkage type gripper with two fingers, Proceedings of the ROSYMP-90 symposium at BARC, Bombay.
28. Component oriented approach to AI based process planning, 14th AIMTDR Conference, IIT Bombay, 21st December 1990.
29. An Expert guide for Optimum Choice of cutting fluids in Metal Working Operations, Proceedings of National Symposium on AI and Simulation, February 1990.
30. An Implementation of Vision and Expert system based Inspection, Proceedings of national Symposium on AI and Simulation, February 1990.
31. Feature - Process Correlation for AI Based Process Planning with Solid Modelling Database, Proceedings of national Symposium on AI & Simulation, February 1990.
32. A Rule Based approach to Gear Design and Analysis for Noise-Free operation, Proceedings of National Symposium on AI and Simulation, February 1990.
33. Expert System for knowledge Based Tool selection through a Distributed approach, Proceedings of the ISENSOFT, 1990.
34. A New approach to the synthesis of gear parameters using CAD approach, Proceedings of the National Seminar cum workshop on Computer Technology and Informatics, Bharathiar University 1991.
35. Simulation of Batch Type Multi-product production system in a conventional machine shop and in an FMS Environment, Proceedings of the National Seminar cum Workshop on Computer Technology and Informatics, Bharathiar University, 1991.
36. A new subdivision algorithm for path planning of a robot, 15th AIMTDR Conference, 1992.
37. Position tolerance verification using Computer Vision Systems, Proceedings of the National Conference on CAD/CAM, 19-20, December 1994.
38. An Approach to inspect 3D features from 2D view using Computer Vision, AIMTDR Conference, Bangalore, 8-10, December 1994.
39. Texture Features based on texture Spectrum Method, 10th National Convention of Electronics & Telecommunication Engineers, 21-22 October 1994.
40. An approach for the recognition of Industrial Components through the application of Computer Vision to the Group Technology part classification Coding Arrangement, 9th National Convention of Production Engineers, Trichy, 1st October 1994.
41. A new subdivision technique for robot path planning in limited work spaces through environment modelling Proceedings of 15th AIMTDR Conference, PSG College of Technology, 1994.
42. Monitoring of a Flexible Manufacturing Cell through real time graphic display Second national Conference on CAD/CAM, PSG College of Technology, August 1994.
43. Closed-form solution for inverse kinematics of a Coplanar 5-axes Articulated Robot Manipulator, NSC, Agra, January 1995.
44. Development of Desktop SLA Machine for Rapid Prototyping Aeronautical Development Agency, Bangalore, May 1995.
45. A two stage camera calibration for 3D scene analysis, NSC, Agra, January 1995.
46. Study on Feasibility of Feature Extraction for Generative Process Plan Development, Proceedings of 17th AIMTDR Conference, Warangal, January 1997.
47. Development of an assembly shop simulator to study the effects of dispatching nuts, Proceedings of 17th AIMTDR Conference, Warangal, January 1997.
48. Automated Visual Inspection System for the Inspection of Fragile Components, Proceedings of AIMTDR Conference, REC-Warangal, 1997.
49. Automated Visual Inspection System for the inspection of Fragile Components in FMS environment, International Conference on AIMTDR, REC-Warangal, 1997.
50. Rapid Tooling for Casting Industry - A study on the application of RP Process - 13th Indian Engineering Congress, the Institution of Engineers, Chandigarh, 1997.
51. A Feature based approach to process planning and Quality Control, International Conference on Quality Engineering and Management, August 1997.
52. A review of recent advances in CNC maintenance in the context of internet, National Conference of Production Engineers, Institution of Engineers, 1998.
53. CAPP for prismatic Parts - process sequencing and set-up planning - 18th AIMTDR Conference, IIT Kharagpur.
54. Enhancement of Surface Durability of Tools made by Rapid Prototyping for Aerospace Applications, Proceedings of National Conference on Quality Engineering in Aerospace Technologies, NAL, Bangalore.
55. Micromachining of Heat Exchanger - An experimental Study Proceedings of National Conference in Precision Engineering (COPEN 2000), 10 - 12, January 2000.
56. Finite Element Thermal Analysis of High Speed CNC Lathe Spindle Assembly, XIth convention of Mechanical Engineers, 29 - 30, September 2000.
57. Design and Analysis of Envelope Press, Proceedings of SDRC Users Conference, September 2000.
58. Study of Rapid Prototyping Components made by FDM, National Seminar on Rapid Prototyping, PSG College of Technology, 1999.
59. Research Activity in Fused Deposition Modelling in PSG College of Technology, Proceedings of workshop on Rapid Prototyping Technologies and Rapid Tooling, PSG College of Technology, Coimbatore.
60. Thermal Analysis of High Speed Spindles, proceedings of 19th AIMTDR Conference, Indian Institute of Technology, Madras, Chennai , December 2000.
61. Investigations on the geometrical accuracy variations due to thermal distortion of High Speed Spindles, 19th AIMTDR Conference, 14-16, December 2000.
62. Modifications of Machine tool spindle nose for High speed operations, Proceedings of the Conference on Computer Integrated Design and Manufacturing, Amritha Institute of Technology, Coimbatore, 14-15th, May 2001.
63. Evaluation of Surface Durability of Sand Casting Tooling made by FDM Process, Proceedings of Symposium on Rapid Prototyping and Tooling, 19-20 October 2000, Bangalore.
64. Studies on the influence of Fabrication Angle on the Productivity of Fusion Deposition Modelling, Proceedings of National Conference on Integrated Design & Manufacturing, 14-15 May, 2001, Amrita Institute of Technology & Science, Coimbatore.
65. Distributed Design in CPD Environment, National Seminar on Design and Analysis Technology Trends, DESIGN VISION 2001.
66. Collaborative Approach For Concurrent Product Design and Manufacture, World Class Manufacturing - 2003, 7-9 May 2003.
67. A Study on the strength of Laser Sintering components produced by layer Manufacturing, National Aerospace Manufacturing Seminar, NAMS 2003,Trivandrum, 20-21 June 2003.
68. Collaborative Design as an enabling tool for Concurrent Engineering, National Aerospace Manufacturing Seminar, NAMS 2003,Trivandrum, 20-21 June 2003.
69. Implementation of a PDM Enabler for Concurrent Engineering, RSC - 2004, January 5-7, 2004.
70. An Architecture for Collaborative Product Development, N.S.V. National Conference on Advanced Manufacturing and Robotics, January 10-11,2004.
 

Top